external aluminium flat profile, cut junction 90°

Anta interna legno internal
profile

Taglio di giunzione 90° cut junction

low emissive glass with an internal security sheet of glass, possibility to insert a triple glass

triple-glass-icon

new thermal spacer in 2 colors:

  • RAL 7035 (clear grey, for clear woods)
  • RAL 9004 (dark, for dark woods)
with argon gas

frame section 64 mm

wood fixed frame L or Z 22/40 mm

ABS profile white, brown or black

joint bloc-stop without screws

external aluminium flat profile, cut junction 45°

External aluminium flat profile External profile
Cut junction cut junction

snap clips in nylon

ASK INFORMATIONS OR A PREVENTIVE

Uw till 1.0

Energy A class, window right for passive houses - I NOBILI

I NOBILI top series is characterized by a new line RELUCE: wood internal profile, external aluminium profile and frame with intermediate ABS. They are windows of high aesthetic and performance quality. Disappear internal glass gasket. External profile is coplanar to frame. Internal is available in 2 versions: LINE and LOOK.

RELUCE LINE: internal flat profile not coplanar, external flat profile coplanar to frame.

legenda-isoterma-inobili The diagram expresses temperatures from outside to inside by underlining difference (15° approximately) both during summer and winter time. The example is referred to cold season, in this case window’s insulation guarantees a great energetic conservation and conserving costs.

external aluminium flat profile, cut junction 90°

Anta interna legno internal
profile

Taglio di giunzione 90° cut junction

new thermal spacer in 2 colors:

  • RAL 7035 (clear grey, for clear woods)
  • RAL 9004 (dark, for dark woods)
with argon gas

low emissive glass with an internal security sheet of glass, possibility to insert a triple glass

triple-glass-icon

external aluminium flat profile, cut junction 45°

External aluminium flat profile 45° external profile
cut junction cut junction

snap clips in nylon

ABS profile white, brown or black

joint bloc-stop without screws

wood fixed frame L or Z 22 / 40 mm

frame section 64 mm

ASK INFORMATIONS OR A PREVENTIVE

Uw till 1.0

Energy A class, window right for passive houses - I NOBILI

I NOBILI top series is characterized by a new line RELUCE: wood internal profile, external aluminium profile and frame with intermediate ABS. they are windows of high aesthetic and performance quality. Disappear internal glass gasket. External profile is coplanar to frame. Internal is available in 2 versions: LINE and LOOK.

RELUCE LOOK: Internal and external flat profile coplanar to frame with slide-away hardware.

legenda-isoterma-inobili The diagram expresses temperatures from outside to inside by underlining difference ( 15° approximately) both during summer and winter time. The example is referred to cold season, in this case window’s insulation guarantees a great energetic conservation and conserving costs.

TECHNICAL SPECIFICATIONS

Download Technical Specification

STRUCTURE

Frames will be realized with the use of wood-ABS-aluminium profiles, while profiles will be realized with lamellar wood or solid wood I NOBILI’s line RELUCE. Fixed frame section is 64 mm for Line version in comparison to Look version that is 82 mm, while in Line and Look version measures 82 mm. Wood profile of fixed frame Line and Look version will be 22mm or 44 mm. All frame’s profiles will be built from external aluminium profiles, intermediate in ABS tubular also in insulation section, for guarantee a good mechanical resistance and a good junction alignment at 45° and 90°. The connection between aluminium profiles and ABS intermediate profiles will be realized through a special area useful to give hospitality to join created on ABS profile. Assembly of external aluminium profile and ABS intermediate profiles will be made through a mechanic rolling for guarantee a better resistance to running, while all profiles will have an indirect combination thanks to interposition of a connective and insulating element (locking plug in nylon joined) that allows a dilatation of the two materials free from tension.

ALUMINIUM

External profiles are realized in aluminium EN AW 6060- T6, with thickness and dimensional tolerance conformed to UNI EN 12020-2:2008 regulation. The same are treated with anodized finish, or painted with powders in RAL colors, metalized and wood effect.

ABS (Acrilonitrile Butadiene Stirene)

Intermediate insulation profiles will be realized in ABS with a thickness of 3 mm of profile perimeter. ABS is the one most precious mixture between resin and elastomer. In line with EN 14024 regulation with thickness and dimensional tolerance conforms to ISO 3302 regulation. ABS is a copolymer derived by polymerized styrene together with acrylonitrile in presence of polybutadiene, and then it could be defined as termo-polymer. Proportions can change from 15% to 35% of acrylonitrile, from 5% to 30% of butadiene and from 40% to 60% of styrene. It’s easy to recycle it and it has high technical properties, it’s a light, rigid and strong material also with low temperatures. Acrylonitrile gives superficial rigidity and hardness, resistant to scratches, while butadiene gives high resistance to push. Available in colors white, brown and black in combination to internal window’s color.

SOLID WOOD

Solid wood profiles are characterized with selected materials of first choice with exsiccation, treated with dyes resistant to light and ultraviolet rays, and protected with specific antiseptics. Finish is realized with opaque polyurethane products, with a high degree of superficial hardness on whole profile. Gaskets inside wood angles are made through a 45° cut , glued with water-repellents and steel staples for hard woods, that is plugs with double groove swallow tailed for soft woods.

LAMINATO WOOD HF (HyperFlex)

The decorative laminate HF (Hyper-flex) with base fir/pine, is a synthetic decorative with high resistance; thanks to excellent flexibility, it’s the ideal product for profile covering. It’s not necessary another finish passage because its good resistance characteristic and decorative HF aspect are sufficient to protect product’s surface and to maintain a degree of stability during time and also an aesthetic aspect significant.

Technical Characteristics:
Thickness: nominal +/-0,05mm
Finishes: opaque or structured
Abrasion resistance: UNI 9115 Livello > 4
Dirty resistance: UNI 9300 Livello > 4
Marks resistance: UNI 9428 Livello > 3
Light resistance: UNI 9427 > 5 scala dei grigi
Formaldehyde emission: EN 717-2 < 3,5 mg/hm2.

ACCESSORIES

For frame’s profile angle junctions at 45° in aluminium-ABS will be made through special aluminium little square to caulk , characterized by little canals for a correct distribution of glue (polyurethane with 2 components) on all junction. Frame is characterized by a solid little square of alignment. T junction will be made with steel screws, reflecting itself in fixing profile area. The system will be characterized by a use of zinc-coated hardware, multilayer type. Closing of secondary profile, like the first as multilayer, will be realized with lever bolt completely slide-away. Movement and closing systems will be chosen on the basis of dimension (base and height) and element’s weight between that indicated from product’s system. At sight hinges will have a caliber of 100 kg for profile (glass included) and will be registered according to 3 orthogonal axis. Hinges covers will be available in colors: lucid silver, satin silver, ivory, white , brown, satin gold, lucid brass. In alternative, it’s possible to have slide-away hinges (standard in Look version) with a caliber of 150 kg for profile (glass included) and will be registered according to 3 orthogonal axis. The handle is Secustik: it’s characterized by a locking mechanism that obstructs action of the same externally, junction element between martellina and full square serves as” mechanic diodo” allowing to action martellina normally by inside but by locking it if someone tries to manipulate it from outside.

HOLDING DRAINAGE AND VENTILATION

Windows will be characterized by a holding system known as open joint, guaranteed by central gasket linked directly on frame’s level. While the particular profile’s drawing that is put near to frame, creates pressure on central gasket. On all frames, fixed and openable,, will be made necessary works in order to guarantee water drainage between glasses and rapid humidity compensation in the double-glazing’s containment area. Frame’s profiles in aluminium-ABS will have transversal walls lightly inclined for facilitate water drainage towards outside. Profile’s ventilation inside double-glazing’s containment air would be made through drainage slots that allow humidity unloading. The opening of drainage slots towards outside are deflected of 20-50 mm in comparison to slots of inclined quarry. Frame’s ventilation would be made by slots that will give the possibility to control water unloading, when it could appear in inclined quarry. While in fixed frame glass stop airing slots in double-glazing’s containment area, allow humidity unloading. The combination between external aluminium-ABS and internal wood, will be realized through a connective and insulation element (blocking plug in nylon without screws) that allows a dilatation of the two materials freeing them by tensions.

GASKETS

Window has different types of gaskets and each one has its characteristic and function. External gasket frame-profile is used for increasing sound and thermal insulation, will be realised in TPE available in colors black, brown and white. Central open joint gasket will be realized in TPE-S compact, and will be available in colors brown, white and black. The connection between central gasket to frame is extruded directly to ABS profile, gasket is replaceable only with version of colors grey or black. The same will be assembled with frame, glued angles with transparent elastic adhesive, single component guaranteed a continue insertion. Central gasket is characterized by a not coplanar profile of 5mm, for a major tolerance for work and registration. Internal gasket between profile-frame, accommodated over wood frame is used for increase sound and thermal insulation, will be realized in extruded available in colors black, brown and white, and will be put in a place made inside wood. Floor insulation gasket will be realized in TPE compact, externally lightly rear for facilitating sealing.

GLASSES

Profiles guarantee an insertion of a double-glazing with standard thickness 48 mm. Window and French window will have double-glazing 4BE-18-6/7 with argon gas and new thermal spacer, available in 2 colors: RAL 7035 (clear grey, for clear internal colors), RAL 9004 (black, for dark internal colors). Supports for double-glazing will be realized with a length of 100 mm projected in order to not avoid the correct drainage and ventilation in double-glazing’s containment area. Glasses with a surface superior to 2,5 m² will be realised always with flat lucid yarn.

TEST REPORT

Report test by LegnoLegno snc - I NOBILI